Jump Start High Speed Floor Restorer
Jump Start Maintainer is formulated for use on all resilient and composition floor surfaces.
To remove routine surface soil and dirt, dilute 3 ounces of maintainer with one gallon of cold or warm water. Damp mop or apply with an automatic scrubber equipped with a red pad. For heavy soil conditions, or to restore the gloss to severely worn areas, Jump Start may be diluted up to 6 ounces per gallon of water. Do not rinse.
Burnish using a 1500-2800 rpm burnishing machine equipped with a soft (white) or medium (aqua or beige) burnishing pad, to improve soil resistant properties and rejuvenate floor finish gloss. To rejuvenate a finish in very heavy traffic areas, dilute the maintainer 1 part to 4 parts water, and apply with either a mop or trigger sprayer.
Cover approximately a 4’ x 8’ area at a time, and then burnish. Standard speed equipment (175-300 rpm) may be used to buff Jump Start Maintainer, but best results are obtained with high or ultra-high speed burnishing equipment.